[Medic1]

The trim indicator on my dash is stuck in the up position. The motor itself moves when raising and lowering but the trim indcator does not move. Any ideas??

[breakdown Bry]

it sounds like your trim sensor , which is located on the side of your lower unit. Bought mine off Amazon, around $60.
When you purchase this item you get both trim sensor and trim limit switch. You will also need to purchase a hinge removal tool and bellows adhesive and a bellows sleeve install tool.These items are a must!!! There are a couple of videos on you tube but they don't show all the steps. This is a two person job, and you need a little mechanical ability.
One set of wires are on the back side of the engine (very tricky to reach). Take your time.Also get Mercruiser
gaskets only. I purchased another brand and the oil passage leaked, purchased oem , problem solved.
Good luck