[Motoxxx43]

My 2¢ on bearing buddies: they pump.the bearings full of grease- this is a good thing.
The bad thing is the grease seal on the back can blow out grease onto the brakes.

I opted for the spindle zerks and when grease is added it pushes out the front and can be removed without blowing out the rear seal.

I know there are tons of people running bearing buddies without issue. I just don't was to deal with them.

Sent from my XT1585 using Tapatalk

[baholtz]

I'll have to post a reply with some pictures.

Had a new axle put on and the frame reinforced. They did alot more reinforcing than i was originally thinking but whatever. Now I just need to paint....

I'll see what I can do to find out more information about parts and sources for anyone else dealing with this....