[AUH Supportes]

Hi guys,
how are you doing ?
we bought last year a Mariah SX25 here in Dubai.
The only thing what was missing on the Boat was the Support for the Table.
Our Dealer here.............forget about !
Who have an idea where we can find this part ?
Looking forward hearing from you

[dudders]

Hi
il_Mio installed a Springfield table onto his SX18.
Now I dont know if this will be the same size as yours, but it might be a good start.
Click this link.
http://www.mariahownersclub.com/foru...e-project.html

Regards

[AUH Supportes]

Originally Posted by dudders

Hi
il_Mio installed a Springfield table onto his SX18.
Now I dont know if this will be the same size as yours, but it might be a good start.
Click this link.
http://www.mariahownersclub.com/foru...e-project.html

Regards

Hi Tony,

thanks a lot for this idea !

Do you have an Idea where I can order this Table ?
I tried to find a Table in the UAE but...............nothing !

Thanks and regards

Michael

[dlowings]

Originally Posted by AUH Supportes

Hi Tony,

thanks a lot for this idea !

Do you have an Idea where I can order this Table ?
I tried to find a Table in the UAE but...............nothing !

Thanks and regards

Michael

I found it at Bass Pro shop online site, looked like a nice project..

[AUH Supportes]

Originally Posted by dlowings

I found it at Bass Pro shop online site, looked like a nice project..

Hey...............thanks a lot !

Regards

Michael

[AUH Supportes]

Originally Posted by AUH Supportes

Hey...............thanks a lot !

Regards

Michael

I found the Table on their site.........thanks a lot.

Do you may remember the Installation depth of the Support ?

[dudders]

Looking at Johans installation, he cut a hole in the carpet then attached the base to his floor.
After the installation he reinserted the removable carpet. The top of the base looks to be about 100mm to 130mm above the level of the floor. Hard to tell exactly.
The table base is 27" tall then the table top.
The 6 stainless screws attaching it looked to be about 400mm long perhaps longer (hard to tell in the picture). He had to be careful because the fuel tank is under the floor.
I hope this is enough info for you.
He bought it from West Marine - table is Springfield. West Marine are one of our forum sponsors, so just click their link on the right.
Cheers
Tony

[AUH Supportes]

Originally Posted by dudders

Looking at Johans installation, he cut a hole in the carpet then attached the base to his floor.
After the installation he reinserted the removable carpet. The top of the base looks to be about 100mm to 130mm above the level of the floor. Hard to tell exactly.
The table base is 27" tall then the table top.
The 6 stainless screws attaching it looked to be about 400mm long perhaps longer (hard to tell in the picture). He had to be careful because the fuel tank is under the floor.
I hope this is enough info for you.
He bought it from West Marine - table is Springfield. West Marine are one of our forum sponsors, so just click their link on the right.
Cheers
Tony

Hi Terry,

thanks a lot for the usefull informations.
Ja.....it is a problem with the Fuel tank :-)

Ok ....good idea ......of cause at this moment I will order it there :-)

Cheers man

Regards
Michael

[il_Mio]

Originally Posted by dudders

Looking at Johans installation, he cut a hole in the carpet then attached the base to his floor.
After the installation he reinserted the removable carpet. The top of the base looks to be about 100mm to 130mm above the level of the floor. Hard to tell exactly.
The table base is 27" tall then the table top.
The 6 stainless screws attaching it looked to be about 400mm long perhaps longer (hard to tell in the picture). He had to be careful because the fuel tank is under the floor.
I hope this is enough info for you.
He bought it from West Marine - table is Springfield. West Marine are one of our forum sponsors, so just click their link on the right.
Cheers
Tony

Tony, screws were 4mm, 400mm would definitely fix the support too

The support is indeed just placed on the floor (raises about 15mm), so does not require any holes except for the screws.
Please pre drill the screw holes with a smaller drill bit without forcing so that you don't hit anything below ( example gas tank in my case).
Once you have the pre drilled holes, you can probe with a nail or iron wire to see how deep you can go ( and hence what length of screws you can use). Always use stainless steel screws.

Cheers,

Johan

[dudders]

Originally Posted by il_Mio

Tony, screws were 4mm, 400mm would definitely fix the support too

The support is indeed just placed on the floor (raises about 15mm), so does not require any holes except for the screws.
Please pre drill the screw holes with a smaller drill bit without forcing so that you don't hit anything below ( example gas tank in my case).
Once you have the pre drilled holes, you can probe with a nail or iron wire to see how deep you can go ( and hence what length of screws you can use). Always use stainless steel screws.

Cheers,

Johan

4mm!!! That picture sure is deceiving Johan.
Too bad you are having such a harsh winter and unable to use your table, you so expertly installed mate.
Come on Summer eh?