[mihatran]

Originally Posted by jsewall82

I will measure them tonight when I get home (weather permitting of course) and let you know. I will measure out as much as I can and give you a schematic as best I can. I bought my boat with a rusted through single axle MTI trailer. I cant wait to get it on this one.

This is perfect. I will not need the dimensions until Saturday or Sunday. I still have the trailer at work for sandblasting/paint which suppose to happen tomorrow...

[jsewall82]

Here is the drawing as promised. sorry so blurry but hope it helps.

[mihatran]

Originally Posted by jsewall82

Here is the drawing as promised. sorry so blurry but hope it helps.

I got the picture, it is ok, I could read the dimensions. Thank you.
I was wondering how will seat your Mariah on those 2 bunks 13-6 long !!! I do not think mine can have contact with the bunks more than 10-0. However, I have only 3 cross members on my trailer with 4-3 distance between them. I think I'll use 2 10-0 inside and 2 6-0 outside.

[jsewall82]

It probably won't contact mine all the way up but I know it would contact farther up then the third at only 9 ft. And I don't want to have the brackets just sticking out so I decided to use the whole length. I will be floating the boat onto this trailer tomorrow so I shall see how it fits.

[nonwin1973]

I have a Z212 the outside bunks are 2x6 and inside are 4x6 (original set up)