1994 Z212 bunks trailer
Can somebody with a 94 Z212 boat tell me how many bunks have on the trailer? I am in progress of converting my roller trailer to bunks and I want to be sure if I 2 bunks 2x6 8' to 10' long will be enough or should I add 2 more (short) at the back. The brochure says the boat is 2700# (I'm not sure if it is with the engine or without Merc V6 4.3 LX)
Maybe a picture will help also. |
Re: 1994 Z212 bunks trailer
Even my little Diablo has 4 bunks. Two 5ft on outside , and two 8ft on inside. It weights around 2400 fueled and a few things on board.
I'd definately go with a 4 bunk setup. :) |
Re: 1994 Z212 bunks trailer
Thanks ColoradoDiablo, I was browsing through Photo Gallery but I couldn't see pictures with the trailers (without the boat). Now makes sense what I had in mind...
|
Re: 1994 Z212 bunks trailer
Quote:
|
Re: 1994 Z212 bunks trailer
Will be Ok with the longer onse to be 2x6 and the short ones 2x4? I can use 2x6 for all of them.
|
Re: 1994 Z212 bunks trailer
Quote:
And btw...you can always go a little longer as long as you provide the necessary support brackets. |
Re: 1994 Z212 bunks trailer
2 Attachment(s)
my "new" trailer that I am putting my z210 on has four. the inside ones are 12ft long and the outside ones are 9ft long. I am replacing the boards tonight though. I bought marine bunk carpet at Academy Sports, and am using pressure treated 2x6 cut to fit. Hope this helps.
|
Re: 1994 Z212 bunks trailer
I already have the carpet for 2x6 (2 rolles 11"x144"). So I'll go with 2 bunks 10' long or so for the inside ones and some 5' to 6' outsides 2x4.
|
Re: 1994 Z212 bunks trailer
Quote:
How far back from the rear axle are the bunks end? |
Re: 1994 Z212 bunks trailer
I will measure them tonight when I get home (weather permitting of course) and let you know. I will measure out as much as I can and give you a schematic as best I can. I bought my boat with a rusted through single axle MTI trailer. I cant wait to get it on this one.
|
All times are GMT. The time now is 09:05 AM. |