[Oregondunes]

Originally Posted by Steve91T

If anybody wants the retractable upper mount, let me know. I ended up not using them and they are just laying around.

Is that the slotted bracket or something different ?

[Paul F]

I would want adjustable electric or hydraulics tabs on a 25 footer.

[Steve91T]

Originally Posted by Oregondunes

Is that the slotted bracket or something different ?

Yep, PR500 or something like that. It's the upper bracket with a lever that you flip either up or down to raise or lower the tabs for beaching or for the trailer.

[Oregondunes]

Originally Posted by Steve91T

Yep, PR500 or something like that. It's the upper bracket with a lever that you flip either up or down to raise or lower the tabs for beaching or for the trailer.

can you post a picture of them ?

[Steve91T]

The PR500 Bracket assembly

[Oregondunes]

Originally Posted by Steve91T

The PR500 Bracket assembly

what keeps it in the UP position ? Their gif file shows it in both positions, but not how it gets to each from the other.

[ColoradoDiablo]

It is a friction fit when they are up or down. The lever fits in the dedent. BTW , they work awesome for trolling when fishing too. In the down position that is

Larry

[m&mmariah]

Another question for MIKEYT. Did the trailer bunks cause any issues when installing the tabs? On my trailer, the bunks project out beyond the end of the boat hull, right where I want to mount the tabs. Not very far, just about an inch or so.

[mikeyt]

Originally Posted by m&mmariah

Another question for MIKEYT. Did the trailer bunks cause any issues when installing the tabs? On my trailer, the bunks project out beyond the end of the boat hull, right where I want to mount the tabs. Not very far, just about an inch or so.

No issues with the trailer bunks & mine stick out about 2".

[John Rush]

96' Shabah install: 80lb actuators