Re: Winter Upgrades
 

I will also be installing the sea-dek on the factory swim step as well to make it look as OEM as possible

Re: Winter Upgrades
 

I'd like to get a mat of that sea del for the floor inside the cockpit...

Sent from my DROID RAZR HD using Tapatalk 2

Re: Winter Upgrades
 

In hindsight, it would have been cheaper then the custom snap in carpet I had made.

Re: Winter Upgrades
 

2 pieces left on my engine project:

1. Heads
2. Pushrods

Picked up a set of Merlin "big valve / big port" steel heads today for a song and a dance. Inconel exhaust and stainless intake valves, 7/16" rocker studs, chrome moly guide plates, Isky springs and keepers (setup for .625" lift...Ill be running .612"...so a perfect match)

Spoke to World products Friday for a bit before pulling the trigger on the heads from the seller. Shared with them the parts Im using. Their prediction is 450-475 hp. They recommended I set the rev limit to 5500 instead of the factory Magnum 5150 rpm. They claim that the parts are good for 6000 all day long and at 5500 she will just sing like a bird in spring.

Waiting til heads arrive, rebuilt and installed to determine push rod length. They are local and are just a day away.

Re: Winter Upgrades
 

How is the build going?

Sent from my DROID RAZR HD using Tapatalk 2

Re: Winter Upgrades
 

Waitin on the heads to arrive Tuesday. Swim step ladder got her Friday, along with templet kit from SeaDek. Wrapping rear seat boxes this weekend with vinyl, cushions are at the upholstery shop.

Re: Winter Upgrades
 

Sounds like we are on the same pace. Order my seadek Friday and cut all the bench seats out today install subs tomorrow evening and start recovering. Can't wait to see how your turns out. You got a target date to complete by?


Sent from my iPad using Tapatalk HD

Re: Winter Upgrades
 

Rear seat is covered in foam, vinyl going on tomorrow.

Swim step design finished

Merlin heads arrived today. going to machine shop tomorrow. motor should be ready to start rigging next friday and installed any time after that. Kinda wish I had more time to dyno it. Love to know EXACTLY how many pony's it has.

Re: Winter Upgrades
 

New vinyl is always nice! Can't wait to see the finished product. As for dyno numbers, that would also be interesting. I know you posted all of your upgrades in a previous post but did you say you were doing anything ignition wise?

Sent from my DROID RAZR HD using Tapatalk 2

Re: Winter Upgrades
 

After we talked I started rethinking the all tube and came up with this
Then seadek is layer on top of the UHMW Attachment 4611
Attachment 4605. Attachment 4604

But the customer wife didn't like the tubes showing so it changed to be cover in fiberglass with the seadek set down flush in it.Attachment 4606
Attachment 4607
Attachment 4608Attachment 4609

Not to hijack the thread just some ideas


Sent from my iPad using Tapatalk HD