|
Re: Winter Upgrades
That's exactly what I'm doing. Mine will have an exposed outer tube frame and boat board/sea-dek flush with top of tube, maybe even slightly elevated 1/4". Mine will taper towards the rear and the ladder will be in the middle. We going back 36"
|
Re: Winter Upgrades
well not so much of an upgrade, but more a fix before detonation. 15 more days and motor & out drive are back together (happy) and connected to the boat. Interior should as well be completed. 2 weeks later the swim step (after the 4 of July)
http://i1197.photobucket.com/albums/...3965359CDF.jpg http://i1197.photobucket.com/albums/...3960B7D29A.jpg |
Re: Winter Upgrades
Wow... Better to find out about that now than whilst underway! Going to go XR components?
Sent from my DROID RAZR HD using Tapatalk 2 |
Re: Winter Upgrades
Quote:
|
Re: Winter Upgrades
back seat is covered in vinyl. only have to do the carpet in the boxes and back.
http://i1197.photobucket.com/albums/...D3DF0FA85D.jpg |
Re: Winter Upgrades
Zoom Zoom
Motor is done. Gonna start rigging it next week and install next weekend. http://i1197.photobucket.com/albums/...096DBD4B69.jpg http://i1197.photobucket.com/albums/...0139F92C73.jpg http://i1197.photobucket.com/albums/...ps0f2fe386.jpg |
Re: Winter Upgrades
the center box will include a cooler tub thats opaque colored. Inside the box I will install blue LED's and red ones in the outer boxes
|
Re: Winter Upgrades
overall specs on the motor
10:1 (vs. 8.8:1 stock) 320cc intake (vs. 188cc peanut port heads) 5150 rpm rev limit (vs. 4400) HP 500 EFI .600" lift cam (vs. .487) Isky springs to match cam roller rockers roller lifters Mag 502 intake system |
Re: Winter Upgrades
I love that seat! It looks like a comfy sofa setup!!! Sweet rockers too.
Putting those in a stock motor free up any HP without adverse effects? Sent from my DROID RAZR HD using Tapatalk 2 |
Re: Winter Upgrades
Quote:
YES...reducing friction wont give you more HP, but it will allow the motor to rev quicker and sustain longer runs at higher RPM's. Compression, flow and timing is most that matters. |
| All times are GMT. The time now is 08:59 PM. |