[blockp]

Thanks. If you have them, please send me the measurements and also check if there's any curve to it. I'll know next weekend what size the opening is and if I'll be going solid glass with hinge or plastic rolled up and tucked in a storage compartment.

[Oregondunes]

Mine is flat glass with hinge. The hinge un-screws from the frame on the passenger side. Ill get your measurements in the coming days.

[dpriebe]

blockp: Here is a photo of the canvas that I have for the center section of my jubilee. It snaps in on both sides of the windshield frame, for the clear portion. And then drops straight down to the deck, again with snaps down the sides. It is an original Mariah piece of canvas, with the Mariah logo on each snap.
From the tag:
Stock No 244DWT
Operator BB20181
Date 4 27 00

I've only had it snapped in once, just to try it out. It don't think that it looks as nice as glass, but it doesn't look out of place. I've really never had a need to really use it. When we boat, we are usually too hot, and want as much air flowing as possible.

[Oregondunes]

23" (wide) is the opening piece of glass on my Z302

[blockp]

Thanks for checking that. I'll know this weekend what size the Jubilee.

[Oregondunes]

i forgot to measure height, but i will today

[blockp]

Jubilee 214 center section is 28.5" wide. A single piece of glass is not going to work there. It will hang over the curved piece too far. I'll come up with something though