[JohnT]

Hey everybody,

A couple of years ago we installed a stereo deck into our 96 Mariah Z255. It has recently fell back behind the panel and when it did it cracked the black molding on the panel. So... this leads me to two questions.... One: Where might I find a replacement panel? And two: Any suggestions on securing the deck better so this does not happen again? It seemed as though the deck was too rear heavy for the panel.

Hope this makes sense to someone...

I really appreciate any feedback!

Thanks

John

[mikeyt]

Originally Posted by JohnT

Hey everybody,

A couple of years ago we installed a stereo deck into our 96 Mariah Z255. It has recently fell back behind the panel and when it did it cracked the black molding on the panel. So... this leads me to two questions.... One: Where might I find a replacement panel? And two: Any suggestions on securing the deck better so this does not happen again? It seemed as though the deck was too rear heavy for the panel.

Hope this makes sense to someone...

I really appreciate any feedback!

Thanks

John

One of our members (95 Z240 Talari) had some for sale. They are duplicates of the originals as the originals are no longer available. You can see photos of what he has here. Send him a PM for details.

[vegaskid]

My panel broke in my 97' z255 and I ended up just getting a piece of black 1/4" plexiglass and cutting it to fit. It was pretty simple. Its not perfect but only I can notice the small miscuts for my stereo and kill switch.