The Mariah Owners Club
Page 1 of 3 1 2 3
Show 40 post(s) from this thread on one page

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Original Mariah Talk (http://www.mariahownersclub.com/forum/original-mariah-talk/)
-   -   1996 Z235 Talari cuddy latch (http://www.mariahownersclub.com/forum/original-mariah-talk/2146-1996-z235-talari-cuddy-latch.html)

rssniff 03-11-2009 04:40 PM
1996 Z235 Talari cuddy latch
 
Could someone email me a picture of the latch that is on the sliding cuddy door on a 1996 Z235 Talari? Mine is missing and I would like to try to find a replacement. Also, any suggestions on where to buy one?

Z 202 03-12-2009 01:08 PM
Re: 1996 Z235 Talari cuddy latch
 
I don't have a picture, and I couldn't find one in the gallery, but in the Mariah parts list, there are links to the manufacturers for the latches

Have a look in this thread on where to buy:

http://www.mariahownersclub.com/foru...hread.php?t=73

mikeyt 03-12-2009 02:41 PM
Re: 1996 Z235 Talari cuddy latch
 
Send a private message to fellow member 'Chicagoweb' and see if he will take a pic and send it to you since he has the same boat.

300sflyer 03-12-2009 03:31 PM
Re: 1996 Z235 Talari cuddy latch
 
Here is a pic of the latch on my 94 Z235. Im sure yours would be the same.



http://img.photobucket.com/albums/v6...r/DSCN0132.jpg

WetWilly 03-13-2009 08:28 AM
Re: 1996 Z235 Talari cuddy latch
 
Hi 300sflyer, Great picture!

Could I ask you a favor for a few more pictures?

If you could, I would like (1) a pic of the other side of the latch and (2) a pic from the inside looking out with the latch in the closed/locked position but with the door open so I can see the latching arm, I think it's a hooked piece but I want to confirm it. Lastly, (3) could I get a pic of the part mounted to the dash/deck that the the latch mates to?

Thanks,
WetWilly

rssniff 03-13-2009 04:28 PM
Re: 1996 Z235 Talari cuddy latch
 
Great board, Thank you all for your help so far. Greatly appreciated.

300sflyer 03-13-2009 05:24 PM
Re: 1996 Z235 Talari cuddy latch
 
More pics.

The first is from behind in the locked position. My hand is holding the spring loaded cylinder "pushed in" so it would resemble what it would look like looked. Not locked, it would simply be flush on the inside, and the pin would be turned 90 degrees.

The second is the lock pin receptacle, on the door frame itself. If you look at the shape, you can see how rotating the pin holds the door closed.

Hope that helps!:wink_thumbup:

http://img.photobucket.com/albums/v6...r/DSCN0134.jpg

http://img.photobucket.com/albums/v6...r/DSCN0139.jpg

ChicagoWeb 03-14-2009 03:42 AM
Re: 1996 Z235 Talari cuddy latch
 
Mike -

Mine looks the same... I have the assembly but my keys never worked. So basically I have never used it.

If someone finds a replacement assembly I would be interested in purchase one to!

ChicagoWeb 03-14-2009 03:43 AM
Re: 1996 Z235 Talari cuddy latch
 
Quote:
Originally Posted by Z 202 (Post 12569)
I don't have a picture, and I couldn't find one in the gallery, but in the Mariah parts list, there are links to the manufacturers for the latches

Have a look in this thread on where to buy:

http://www.mariahownersclub.com/foru...hread.php?t=73
Just a FYI those links are not accurate for the z235 latches...

ChicagoWeb 03-14-2009 03:45 AM
Re: 1996 Z235 Talari cuddy latch
 
Quote:
Originally Posted by 300sflyer (Post 12576)
Here is a pic of the latch on my 94 Z235. Im sure yours would be the same.



http://img.photobucket.com/albums/v6...r/DSCN0132.jpg
Do you have problems with the (2) sliders that hold the cuddy door sticking? I have been using a marine grade (wd40) type silicone spray to grease the door for the past couple of years but I am looking for a better solution.


All times are GMT. The time now is 06:31 PM.
Page 1 of 3 1 2 3
Show 40 post(s) from this thread on one page