12-30-2008, 08:44 PM
|
#2
|
ShabahZ280 is currently offline
Status: Admin & Mariah Fanatic
Join Date: Jun 2007
Location: Cincinnati, OH
Find me on the Map
My Year: 1999
My Model: Z280 MCC
My Engine: 7.4L MPI Bravo III
Thanks: 8
Thanked 367 Times in 274 Posts
|
Alex, unfortunately there's really no other option than repairing your icebox lid. The original parts were made in the Mariah factory from ABS molded plastic. The molds for the interiors and trim were either destroyed or sold for scrap. Which leaves us "old" Mariah owners kind of up the creek!
There are several places around the country that can perform plastic repair. However you might have to remove it and send it for repair if you can't find a local place. If you've got a woodgrain decorative finish on it, this can be added after the repair is completed.
When I bought my boat, the dashboard gauge cluster was cracked and damaged in a few areas. I went through the whole removal, repair, and restoration process. You can read about my whole ordeal by Clicking Here.
Can you post a pic of what yours looks like, maybe we could all put our heads together and come up with a solution for you!
__________________
Chris
-1999 Mariah Z280 MCC, 7.4L MPI Bravo 3 DuoProp
-2000 Mariah Shabah Z250 Limited Edition, 7.4L MPI, Bravo 1 (Sold, but not forgotten!)
-Formerly known as ShabahZ250
-USCG Licensed 50 Ton Near Coastal Master Captain with Towing Certification
|
|
|
|
Dash ice box lid
