[Deepsix]

Hi all
I am new to boats and have just bought a lovely looking boat but can't figure out what model it is, i have looked all over the web, one feature that i can't find is it doesn't have a bench seat in the back it has an engine cover in the middle with 2 cup holders in it, i have linked images.
many thanks
Steve

[Deepsix]

Oops forgot to add it is a 2000 model

[mikeyt]

You are a contributing member which means you have access to all of the brochures in the Original Mariah Promotional Materials Archive. You dont say what the length of the boat is but I'm sure if you looked at the 2000 brochure you would find your boat. I believe the only model name they used was "Shabah' in 2000. The seat configuration has no bearing on the model though.

If you are really desperate for information then send a Private Message to the site Admin guy (ShabahZ280) and give him your hull ID#. He'll send you what build info he has.

[Deepsix]

Thanks for the reply, I did look at the brochures but was looking for the seat layout, I will have another look.

[Andy b]

Why is the HIN on a screw on plate?
It should be molded into the gel coat.

Sent from my SM-G920F using Tapatalk

[Deepsix]

Oh i don't know..... where is it normally located? is this a problem...?
The boat is a one owner from new and he has the original purchase receipt.

[LakeRat11]

Looks like you have yourself a Shabah.

Sent from my SCH-I545 using Tapatalk

[Deepsix]

Originally Posted by LakeRat11

Looks like you have yourself a Shabah.

Sent from my SCH-I545 using Tapatalk

Hi thanks very much for your help

[ShabahZ280]

Hey there deepsix, it's a 182 Shabah. I PM'd you the build sheet info. Hope this helps!

[Deepsix]

Originally Posted by ShabahZ280

Hey there deepsix, it's a 182 Shabah. I PM'd you the build sheet info. Hope this helps!

Thank you that would be great