Trailer master cylinder needed
 

I have a z215 96 Talari trailer and my master cylinder is shot. Where would I get one?
Thanks in advance


Sent from my SCH-I545 using Tapatalk

Re: Trailer master cylinder needed
 

Just about any trailer parts store. :)

Here is one place

Hydraulic Surge Trailer Brake Actuators at Trailer Parts Superstore

Re: Trailer master cylinder needed
 

Thanks Larry

So you replace the while works?!! And not just the master...ok
I will need to tear into it...thanks again

Al

Re: Trailer master cylinder needed
 

That's the easiest and safest way to get it back to working condition Al. :)
Just measure the size of the tongue main beam on your trailer , and order or pickup the size coupler that fits.

Can you give us a pic of your existing mount?

Re: Trailer master cylinder needed
 

Here is a photo of the neck..

Re: Trailer master cylinder needed
 

Do you have drum or disc brakes Al?

Re: Trailer master cylinder needed
 

Drum....those pins are a biatch to get out...especially the front one

Re: Trailer master cylinder needed
 

Did you get it off?
Use a die grinder , or maybe a dremel if you have too.
Then you can get one like the #70463 in link I gave you , or similar style.

Re: Trailer master cylinder needed
 

Yeah ...got it off. So now I have basically 2 parts...the hitch and master cylinder..

I wonder if I should convert it to electric brakes? If it can be done then I would have to worry about leaks again...

Re: Trailer master cylinder needed
 

Electric brakes and water don't get along real well Al , but if your in a freshwater area all the time , I would think they would be fine.
Some of the other members with trailer brakes can give you a better opinion on them. My little Diablo trailer has none.:yes_grin: