07-25-2009, 08:10 PM
|
#2
|
mikeyt is currently offline
Status: Platinum Contributor
Join Date: Jul 2007
Location: Ontario
Find me on the Map
My Year: 1996
My Model: Shabah 180
My Engine: 4.3
Thanks: 87
Thanked 579 Times in 538 Posts
|
Re: Wobbly windshield
I'm not sure about your particular boat but i've removed my complete windshield assembly & reassembled it. It's a little fiddly to do but with some patience is easily done. Access to my screw attachments was gained by removing the foam trim strip at the base of the windshield. My boat had Phillips head screws and retainer nuts underneath the dash but you should be able to simply tighten the screws if the nuts are still in place. Do the same thing with any windshield support brackets/arms that your boat may have.
__________________
Rarely visit this site given its problems and lack of management interest.
|
|
|
|
