Table Support?
 

Hi guys,
how are you doing ?
we bought last year a Mariah SX25 here in Dubai.
The only thing what was missing on the Boat was the Support for the Table.
Our Dealer here.............forget about !
Who have an idea where we can find this part ?
Looking forward hearing from you

Re: Table Support?
 

Hi
il_Mio installed a Springfield table onto his SX18.
Now I dont know if this will be the same size as yours, but it might be a good start.
Click this link.
http://www.mariahownersclub.com/foru...e-project.html

Regards

Re: Table Support?
 

Hi Tony,

thanks a lot for this idea !

Do you have an Idea where I can order this Table ?
I tried to find a Table in the UAE but...............nothing !

Thanks and regards

Michael

Re: Table Support?
 

I found it at Bass Pro shop online site, looked like a nice project..

Re: Table Support?
 

Hey...............thanks a lot !

Regards

Michael

Re: Table Support?
 

I found the Table on their site.........thanks a lot.

Do you may remember the Installation depth of the Support ?

Re: Table Support?
 

Looking at Johans installation, he cut a hole in the carpet then attached the base to his floor.
After the installation he reinserted the removable carpet. The top of the base looks to be about 100mm to 130mm above the level of the floor. Hard to tell exactly.
The table base is 27" tall then the table top.
The 6 stainless screws attaching it looked to be about 400mm long perhaps longer (hard to tell in the picture). He had to be careful because the fuel tank is under the floor.
I hope this is enough info for you.
He bought it from West Marine - table is Springfield. West Marine are one of our forum sponsors, so just click their link on the right.
Cheers
Tony

Re: Table Support?
 

Hi Terry,

thanks a lot for the usefull informations.
Ja.....it is a problem with the Fuel tank :-)

Ok ....good idea ......of cause at this moment I will order it there :-)

Cheers man

Regards
Michael

Re: Table Support?
 

Tony, screws were 4mm, 400mm would definitely fix the support too :yes_grin:

The support is indeed just placed on the floor (raises about 15mm), so does not require any holes except for the screws.
Please pre drill the screw holes with a smaller drill bit without forcing so that you don't hit anything below ( example gas tank in my case).
Once you have the pre drilled holes, you can probe with a nail or iron wire to see how deep you can go ( and hence what length of screws you can use). Always use stainless steel screws.

Cheers,

Johan

Re: Table Support?
 

4mm!!! That picture sure is deceiving Johan.
Too bad you are having such a harsh winter and unable to use your table, you so expertly installed mate.
Come on Summer eh?

Re: Table Support?
 

Hmm....and now my mistake, screws are 40mm = 4 cm.... Must be the cold winter wearing down my brains !

Indeed, I am counting down towards spring. Next week there is a boat show in Ghent, at least something to look forward too. Is still snowing and freezing here, but is getting better.

One thing is sure, I will definitely use the table next summer !

Re: Table Support?
 

"Boat show in Ghent".......now you are making me wish i was there walking along the Graslei and the Koornlei again........in warmer weather of course. :)

Re: Table Support?
 

MikeyT,

always welcome, just let me know when you are around in Belgium, and we can have a nice "Duvel" or "Leffe" in our little marina pub !

Cheers,

Johan

Re: Table Support?
 

When (not if) i make it back there, i will definitely enjoy a Duvel, Leffe or maybe even a De Koninck with you. :)

Re: Table Support?
 

Nothing like getting bent in Ghent eh Mikey?

Re: Table Support?
 

I made a mistake to Johan, figured they were 4cm screws so 4cm times 10 = 400mm of course???!?!!?!? derrrr.
Must be the hot weather frying my brains! :wink_thumbup:

Re: Table Support?
 

Hi guys,

thanks a lot for all the informations.

Thats great !

regarding to the Wintertime........thats a great point here on Abu Dhabi. Now its winter and we have around 27 Degrees Celsius.
So .......Boating here 12 month a year !

have agreat day

regards

Michael

Re: Table Support?
 

Oh sure Michael....."boating 12 mos a year" ........rubbing it in are we? :rolling_laugh:

Re: Table Support?
 

Re: Table Support?
 

Hey Willy.......damed for me it sounds like :)
But what can I do.......these are the Arab Emirates......beautiful temperatures in Winer and a bit 2 hot in summer !