Re: High Five
Quote:
|
Re: High Five
Do u know how much you want for the prop and is the prop stainless.
|
Re: High Five
$150. I can post some pics, but I am at work. I will get one posted in the next couple of days. It is stainless and doesn't have a knick on it. I believe they are 350 to 400 new. You can look it up online. It is a 19P 4 blade stainless Stiletto.
Danny |
Re: High Five
I've been out twice now, both on very flat water and with 6 or 7 people on board. My readings are 50mph on the speedometer and 4,800 revs. How would I know if I was at the rev limiter? The engine sounds the same at 4,800 rpm as it does at slower speeds.
The High 5 definitly gave me much quicker acceleration/planing and good planing at less than 20mph. The only downside is the boat lists to port at full throttle - too much torque from prop. I look forward to some tubing and skiing now! |
Re: High Five
Boat motor will start to sputter/cough if the revs get too high and the limiter kicks in.
|
Re: High Five
FYI-I sold my 4 blade Stiletto. Sorry I never posted any pics.
Danny |
All times are GMT. The time now is 07:28 PM. |