The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Projects (http://www.mariahownersclub.com/forum/projects/)
-   -   going ahead with a restorion. (http://www.mariahownersclub.com/forum/projects/6050-going-ahead-restorion.html)

buchshot12000 08-17-2011 02:19 AM

going ahead with a restorion.
 
I have decided instead of doing just a fix-it and run it. i am going to attempt a proper Restoration. I still haven found interior colors, but I will try to color match it from parts not exposed to the sun. I thought the interior would match the exterior colors, but that's not the case, unless the sun caused that much change in colors.

ShabahZ280 08-17-2011 05:53 PM

Re: going ahead with a restorion.
 
Awesome! Good luck with it, and keep us updated with the progress. If you've got any questions, just ask and we'll try and help you through it all! :wink_thumbup:

buchshot12000 08-19-2011 01:35 PM

Re: going ahead with a restorion.
 
Quote:

Originally Posted by ShabahZ250 (Post 32032)
Awesome! Good luck with it, and keep us updated with the progress. If you've got any questions, just ask and we'll try and help you through it all! :wink_thumbup:

Thanks,

buchshot12000 03-09-2012 02:10 AM

Re: going ahead with a restorion.
 
bringing up an post, but the restortion is back on, motor is in the machine shop, out drive is getting tested.
I have a ? though. how to pull the interior out. and do you have to seperate the hull to replace carpet.

DCB_MINDED 03-09-2012 08:07 PM

Re: going ahead with a restorion.
 
It's been my experience that boat manufacturers can get pretty tricky when it comes to hiding screws. The little "buttons" (if you have any) that are about 1" around will pop right off and there is a screw under them. Check in compartments, cubbies, and most of all..... BE PATIENT! if it isn't coming, then something is still holding. I havent seen too many clips that will just pull off. Mostly screws/bolts. Good luck! You are taking on a BIG job!

buchshot12000 03-15-2012 12:24 PM

Re: going ahead with a restorion.
 
Quote:

Originally Posted by DCB_MINDED (Post 34510)
It's been my experience that boat manufacturers can get pretty tricky when it comes to hiding screws. The little "buttons" (if you have any) that are about 1" around will pop right off and there is a screw under them. Check in compartments, cubbies, and most of all..... BE PATIENT! if it isn't coming, then something is still holding. I havent seen too many clips that will just pull off. Mostly screws/bolts. Good luck! You are taking on a BIG job!

I got most of the interior out. and all the bad carpet. I dont really want to take the top off.
It does look like some one has been in there before to get to the fuel tank. the deck looks like it was cut. and not glassed over when the put it back:mad: so its drying out now.


All times are GMT. The time now is 04:00 AM.