Stere Bezel/Panel
 

I have been trying to find a replacement Stereo Panel for my 95 Z240 Talari. After 2 years of looking with no success I went out and made one. I have attached some pics of the end result.

Mike

Re: Stere Bezel/Panel
 

Re: Stere Bezel/Panel
 

Nice Job Mike, looks great!

Can you share your costs and things so other members can get an idea what's involved with doing this? It seems to be a very common issue, and one people are always looking to fix!

Re: Stere Bezel/Panel
 

I'd be interested too!

Re: Stere Bezel/Panel
 

I used the Drawings from Randy Jobe in the "How To" Forum and took them to a machine shop that I am familiar with. (Costs will vary from Shop to Shop and your location)
They had to recreate them in a version campatible with their software.
I then commited to a minimum order of 10 since they didn't want to set up their equipment for 1 piece not to mention that the cost per piece was more appealing.
I do have the option now for future orders if there is any interest.

Re: Stere Bezel/Panel
 

Hello mike,

My wife gave me the OK to go foir the original blac. Can I still get one?

Thanks Dave

Re: Stere Bezel/Panel
 

Mike,

I tried to find it under the Parts and Collectibles. Still trying to get my site navigational skills down.

At first I thought you had the plastic. I don't really need it now, but I thought I should have a back-up.

The pictures are great and I liked the stenciling to copy the look original look. Question is .. Do you have one already made or would you take orders to have one made up?

Thanks dave

Re: Stere Bezel/Panel
 

Hi,
I have a 1995 Barchetta 192Z
I too am looking for this stereo Bezel. Would it fit in this model? It looks very similar. If you have one available, I'd be interested in purchasing one too. Let me know. You can email me if you would like
[email protected]
Thanks,
rtopedvm

Re: Stere Bezel/Panel
 

Mike, Do you sell just a template so I could use the pattern to have a machine shop cut one out for me local? Paper or cardboard? I have a 96 Z255 Shabah that your metal one looks exactly like the wood one I need to replace. Thanks

Re: Stere Bezel/Panel
 

that is great job . i just made me a new panel out of brich wood and painted it covered it with a small sheet of siding wood grain. but mine does not look as nice as yours . will get a picture tomorrow for show but i will be reworking mine . yours put mine to shame. lol but i tried.

Re: Stere Bezel/Panel
 

How about the lettering? How did you get it on the new plate?

Re: Stere Bezel/Panel
 

Hi Mike:
Same boat, same issue for me. You've done a first-class job on the solution. Any chance you have any of the original 10 units for sale? Or alternately, the contact info for the shop who can make another run?
Also, anyone know of a thread for a design of a support system for the radio?
Thanks!

Re: Stere Bezel/Panel
 

Mike, same question as mjhinno. Do you still have any panels left, and are you willing to sell them?

Re: Stere Bezel/Panel
 

guys....this is an old thread that you have resurrected. You might be better off sending a PM to the vendor. I'm not sure that he comes online here much anymore.

Re: Stere Bezel/Panel
 

Hi Mikey
I would be happy to contact the vendor, but I have not seen any information here about who that would be. Can you help there?
Thanks in advance.

Re: Stere Bezel/Panel
 

Just left click on his name (95 z240 Talari) in his last post and you will get an option to send him a message.

Re: Stere Bezel/Panel
 

Thanks Mikey. I suppose I could just read a bit more carefully too. Saw Mikey on the message and made the leap to Mike the original poster. Appreciate your help.
Noggindoc, I have pm'm z240 so if he has any I'll let you know, or perhaps well split up whatever minimum there is from the machine shop.

Re: Stere Bezel/Panel
 

Edit... Oops, I just did it too. :D Mike's gonna do some good business this week. :yes_grin:

Re: Stere Bezel/Panel
 

I have replied to the PM's that I recieved. Thanks for the interest. I have had more of the panels made and I do have some available. As far as the Font on the lettering, it matches the Original Font and is part if the "Film". Feel free to call me at 573-275-4518 if interested.

Re: Stere Bezel/Panel
 

Thanks. I'm very interested. What's the best time to call you? Are you around this weekend? I'll probably take 2 of them. "Film" too.