Eva foam flooring
 

Hello I was wanting to put some Eva foam flooring down to replace our carpet. Has anyone done this I planned to use the carpet as a template to make it easier. However I was wondering if you anyone has ordered and pre cut ones for their boat. All the site I’ve looked at don’t have Mariah listed for any template. Thanks for any help

Re: Eva foam flooring
 

I used a similar company, it’s not too difficult to do a template. I just went to Lowes/Home depot, bought a roll of heavy construction paper. It’s used on floors to protect the floors while work is being done in a home. If you take that and a trim knife/box cutter. Just lay this into the area and cut the edges, tape it together really well in the seams. Just act like you are laying this paper in your boat as carper. You can draw on it, makes notes for the Carpet manufacturer, basically you can white all over it. Most importantly, cut it to fit exactly the way you want the new floor to be. Then you can just roll it up and mail it to them (in a tube from UPS store) . This method worked really will for me.

Re: Eva foam flooring
 

Ok thanks I may try that. I have some samples on the way I was goin to play with. I don’t think it will be that hard to tackle

Re: Eva foam flooring
 

I've checked into it also and what is posted above is the typical process. Nobody has Mariah patterns so you will need to create a template for them. If you do, make sure you take your time and make the template perfect and your finished product will look fabulous.