Re: Bow rider door
 

Thanks guys. If anyone has pics that would be awesome. I'm going to at least try to find a bow cover, but as we know it's not easy task.

Re: Bow rider door
 

I'll get u some pics of mine, but it'll prolly b next weekend before I get around to it both open and closed. They really they fold back and outta the way enough to keep in place all summer. but I usually take them off and store them in my engine compartment.


Sent from my iPhone using Tapatalk

Re: Bow rider door
 

Yes they're easy to install. Any bow cover you buy will have to have snaps installed in spots where they will match up with the snaps on your boat. I like jarwiebe's idea too though...

Re: Bow rider door
 

Took her up north before winter gets us here in michigan...that front bow door would have came in handy when doing some speed runs when it got a little chilly.
http://i22.photobucket.com/albums/b3...ps6qdjxzqr.jpg[/URL]
http://i22.photobucket.com/albums/b3...pslkpzgyed.jpg
http://i22.photobucket.com/albums/b3...psbmg1cbqo.jpg


i definitely need to get a cover for it during travels...the storage cover, even strapped, was ballooning and flapping everywhere...we got caught in a rainstorm on the drive back and it got inside pretty wet thru the cover as well.

http://i22.photobucket.com/albums/b3...pskd4oqmxe.jpg[/URL]

Re: Bow rider door
 

I winterized my boat yesterday and snapped a few pictures of the "walk through door" for those of you who may be interested in doing something similar. The canvas shop put 4 snaps down each side and velcro across the top to keep the "door" in place.

Re: Bow rider door
 

Thanks for pics and idea...looks great (and nice clean boat)))!!!!!

Re: Bow rider door
 

Finally got my lil project finished.

1/4" aluminum c channels, 1/4 smoked plexi and some ss lil screws, lots of measuring and shes matching the tints pretty decent..

http://i22.photobucket.com/albums/b3...psn177irsa.jpg

http://i22.photobucket.com/albums/b3...ps7ke5w18x.jpg

http://i22.photobucket.com/albums/b3...pstfgbpnca.jpg

http://i22.photobucket.com/albums/b3...psch18qg4b.jpg

When not in use, ill store it on the compartment...hope it fits ok, havent tried that yet...

Re: Bow rider door
 

[emoji106]🏻 Nice


Sent from my iPhone using Tapatalk

Re: Bow rider door
 

I made a Plexiglas piece for my Z272. Works great, really keeps the wind down. When the weather gets nice, I store it on the dock. It's only in the boat in the spring and fall when needed. The only time it's an issue is when you have to get to the front of the boat for docking or tying off.

The 272 has a slight step on either side between the walk way and the bow seats, I slide it down there. I don't know if that will work on your boat.

If you can come up with a pattern, I can cut a piece for you. I own a machine shop and have a laser that can cut lexan like butter. Cost of a 4x8 piece of 1/4" lexan is about $150. I'm guessing but I doubt if you would need much more than a quarter sheet. Figure $40 plus shipping.

paul

Re: Bow rider door
 

Yeah just tried it...the plexi fits on my storage in the back...so thats where she will stay when not in use...ill get a sticker or something to make it look more OEM upfront.