[Steph101]

I just bought z252 2000 and i dont understand how the deep Finder works, can anybody help me?

[mikeyt]

First off, welcome aboard. Second, what is happening with your depth finder? Is is reading erratically or is it not reading at all?

[99 Mariah 258]

Good luck. The depth finder on my 99 258 has a mind of its own. I turn it on with the dash switch and sometimes it reads instantly and sometimes it will just flash .5 repeatedly. Just today it was reading 5.5 feet and I almost ran a ground it was like 2 ft of water. Thinking about new gauge and sensor/ transducer...

[Steph101]

Yes that exacly like that when its on it flashes .5 for a couple of minutes and after that it sometimes give me the deep and when I stop moving, it stops reading and start to flash again. I dont no how to fixe it.

[mikeyt]

Originally Posted by Steph101

Yes that exacly like that when its on it flashes .5 for a couple of minutes and after that it sometimes give me the deep and when I stop moving, it stops reading and start to flash again. I dont no how to fixe it.

Ok, the likely cause is that the transducer has loosened from its mounting position under the engine. If you do a site search for 'transducer' you will find numerous pages of threads discussing how to fix this very problem.

[Steph101]

Thanks. That works. Now I am trying to find the original table. I looking on eBay and Amazon and I can't find it. Do you know where I should look? I am looking for all the accessories for my z252 2000.

[ColoradoDiablo]

Patience and time is all I can tell ya.
The "Original Mariah Boat" parts have been out of circulation since the shutdown in 2001.
Best bet is here on the "marketplace" , Ebay , CL , and about any boat salvage you can think of.

[mikeyt]

If you look in our Original Parts & Vendors List we do have a listing for the original vendor: Todd Boat Seats, Marine Seats, Boat Chairs, Gas Caddy, Leaning Post, Helm Seats, Boarding Steps
Might be worth a try.

[Steph101]

I want to give more hp to my z252 do you know what can i use like modify the computer or p flow or anything helse it goes only at 47 mph and i just did à tune up thanks