Originally Posted by Fletch2 (Post 53716)

Yeah, we tried that. Moved as far back as the toothed adjuster will allow but she still had to sit at 45 degrees with legs in the gap through to the bow. I think the only way around it would be to take the seat out, unscrew the seat base and relocate it aft by about 4 inches and screw it back in. Bit concerned about the engine hatch opening ok then, without being impeded by the rear facing seat. Where there's a will, there's a way (or so they say) :confused:

http://www.mutualsupport.org.uk/imag...tfullyback.jpg

Should have taken a clearer picture but thats it with the seat fully aft.

Originally Posted by mikeyt (Post 53708)

:rolling_laugh: The seat slides back & forth.

Originally Posted by Fletch2 (Post 53729)

Mikey, just discovered your thread (from 6 years ago) about replacing the back to back with a pedestal seat.
Did it go as smoothly as it seems?
How did you secure the pedestal to the floor? I saw the bit about the ally plate being universal so I assume you used self tapping bolts? Or did you you find a way of getting nuts behind the plate?