94 Barchetta switch problem
 

I just got a 94 barchetta the switches arnt working



:shakehead:

Re: 94 Barchetta switch problem
 

That is a problem isn't it. Are you asking for some help or just making a statement? ;)

btw....welcome aboard.

Re: 94 Barchetta switch problem
 

need help

Re: 94 Barchetta switch problem
 

You're going to have to supply a heck of a lot more info on the problem than just the switches aren't working! :shakehead:

We're good around here..........but we aren't that good.:yes_grin:

Re: 94 Barchetta switch problem
 

well one of the switches lights up others dont work nav light blower pump in lights checked grounds on bettery

Re: 94 Barchetta switch problem
 

They are run in a series from one switch to the next on the ground side usually starting from the switch closest to the steering column. Is that switch working biker?
Switch contacts , and fuses are notorious for corrosion on the spade.
As for not lighting up , could just be the small bulb for that switch is burned out.
I'd use a test light , and start chasing from the fuse panel to the switches. :)

I meant the ground side biker , sorry my bad.

Re: 94 Barchetta switch problem
 

As Larry suggested, corrosion is the number one electrical problem in boats. Check/clean your connections and use the test light to see if power is getting to the switch. If power is there then yes its possible the switch(es) have finally failed & need replacement. If you need replacement parts check our Original Mariah Vendors list for a supplier.