The Mariah Owners Club
Page 3 of 5 1 2 3 4 5
Show 40 post(s) from this thread on one page

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Original Mariah Talk (http://www.mariahownersclub.com/forum/original-mariah-talk/)
-   -   Time to lose the cassette deck!! (http://www.mariahownersclub.com/forum/original-mariah-talk/681-time-lose-cassette-deck.html)

mikeyt 05-29-2008 11:15 PM
Quote:
Originally Posted by Paul F (Post 7293)
OK, fellas, the process has begun. I've pulled the old radio. 4 screws and it's out! It looks like I won't be able to use the old metal black mounting plate unless I enlarge the hole in the metal plate. It's cut for the center of the unit with holes on both sides which attach it to the knob stems with 2 flat nuts.

I now have a fiberglass hole with 4 screw holes from the metal backing plate. How will the new radio attach to the boat? Do I just screw it into the fiberglass?:confused:

Maybe if I went ahead and bought the new one, I would figure it out.
I have a nice 8 track tape deck i can sell ya. ;)

Mariah_in_636 05-30-2008 12:18 PM
I didn't see any "extra" speaker wires in the wire loom or bundle though. Do they have them run somewhere different?

Also, where in the bow are the ends? Mid bow, forward bow?

Thanks

mikeyt 05-30-2008 01:57 PM
Quote:
Originally Posted by Mariah_in_636 (Post 7342)
I didn't see any "extra" speaker wires in the wire loom or bundle though. Do they have them run somewhere different?

Also, where in the bow are the ends? Mid bow, forward bow?

Thanks
I'm not sure where they are located in a 252. In mine they are located in the forward bow and labeled. Mariah used a full wiring harness with labeled ends no matter what level (Z, Ltd or basic) boat.

Z 202 05-30-2008 03:00 PM
Yeah, I was surprised to find my 202 was already pre-wired for 6 speakers. The loom behind the stereo has them all identified with tags. They seem to be pretty substantial speaker wires. I'm not sure where the forward (bow area) ones terminate though.

@Paul: I've got a whole pile of 8 Track tapes for that deck mikeyt is trying to sell you. Though you'd have to be a fan of 70's tunes to enjoy them... ;):D

Mariah_in_636 05-30-2008 04:10 PM
Thanks Mike I will have to get back down there and check it out. I am heading out on the water again in the morning if the weather permits. Otherwise I will go out in the afternoon.

EITHER WAY I AM BOATING TOMORROW!!!!!!!

180diablo 05-30-2008 05:52 PM
Quote:
Originally Posted by mikeyt (Post 7329)
I have a nice 8 track tape deck i can sell ya. ;)
I remember hearing about these " 8 track " things on the History channel....


:D

97 Z222 05-31-2008 12:39 AM
I have the z model and the wires are in the bow, but didn't come with speakers. This will be my next addition, as my teenagers are looking for bigger sound.

300sflyer 06-07-2008 11:43 PM
I added a pair of 6" and a pair of 6"x9" Kicker speakers to our boat. The previous owner had added a Sony AM FM CD player. It sounds great now!:yes_grin:

Adding the 6x9s was a bit difficult, as I had to make up a vinyl covered plywood oval spacer, as the back of the speaker magnets, were touching the inside of the hull after I cut the holes. It worked out in the end though.;)

I did it for the kids too... Only the biggest kid in our house... is me...

http://img.photobucket.com/albums/v6...r/DSCN0175.jpg
http://img.photobucket.com/albums/v6...r/DSCN0174.jpg

Mariah_in_636 06-08-2008 12:20 PM
The spacer looks good behind that 6x9. Looks very clean.

djmccormick 06-11-2008 11:38 AM
Replacing the Radio
 
I have a 1994 182 Barchetta and I order a Sony CDX-M10 with 1620 Speakers to upgrade the exsisting Cassette Player. It should be here on Thursday, just intime for the weekend.

Reading some of the posts, I was wondering about the wiring on mine, if it had the exsisting wire for rear speakers and if there a plpace already to cut out?

I am new here, so I have lots of questions :)


All times are GMT. The time now is 04:48 PM.
Page 3 of 5 1 2 3 4 5
Show 40 post(s) from this thread on one page