Parts for Z308 searching
 

Hi @ all

We need for our Z308 the table inside cabin and the front leather part for building the bed.

Thx
best regards
Wolfgang

that....could be tough to find. :(

you may have to custom make those items but someone else here might know of something somewhere....

So i have to wait ....:(
Thank you:)

Hi topgunwolf,

What year is your Z308?

You can try and contact member "[email protected]", he's listed as owning a 2001 Z308.

Try sending him a PM @ http://www.mariahownersclub.com/foru...do=newpm&u=120 and if he responds, see if he has the same table and if it has a manufacture's name on it anywhere.

He might be able to provide some pictures for making a new one including the part for the bed if need be.

Good Luck and let me know,
WetWilly

Willy's on the ball! Good thinking!!

Hi :)

Its a 2000-2001 in nearly bad conditions inside:punch_out:, but the engines are well and also the hull:yes_grin:.

greetings from austria

Wolfgang:wink_thumbup:

Hi Willy

yeah i did, but he has the same problem as we have - missing nearly the same parts,...
:eek_animated:
Bad luck:mad:

Greetings:D

Wolfgang

West Marine sells both the table tops and the post for the cuddy. It is made my Todd Enterprise. I just bought the setup for my Z255 it uses the "posi lock" system, looks good, cost was about $125

Jeff, excellent post!

topgunwolf, check the floor mount for your tables and if you find a threaded post sticking up from inside of the hole, you have the "Posi-lock" system from Todd Enterprise as well.

With the Posi-Lock system, the table post threads into the floor mount preventing it from coming out incase of rough seas or if someone bumps into it. The top mount (part under the table) just slides over the top of post.

If you decide to make or purchase a different table, the post and table mount are available separately from West Marine.

Posi-Lock post 26" high (floor to table bottom) - West Marine # 138797 ( Contact them to see if other heights are available too) Cost: $27.99 US - See link below:

http://www.westmarine.com/webapp/wcs...key=SiteSearch

Mount - Table pedistal - West Marine #138789 Cost:$21.99 US - See link below:

http://www.westmarine.com/webapp/wcs...key=SiteSearch

Unfortunately, there's the shipping: http://www.westmarine.com/webapp/wcs...4&section=care

Good Luck,
WetWilly

Thanx to all!!!!!!
 

I thank you all for your help!!:yes_grin:


I`ll try to find the missing parts - thx for all your tips and messages.:wink_thumbup:

will send you the pictures from our "new" used boat Mariah z308.

Thanx to all and i wish you a merry christmas and a happy new year!!!!!!!!!:worry_to_laugh:

Best wishes from austria to the rest of the world......:D


Greetings :)

Wolfgang

Heres a pic of mine
 

http://www.jeffbarnettproductions.com/Boat/DSC_0056.jpg

Thanks for your answers!!!:)

You helped me a lot!:wink_thumbup:

Wish you all a happy new year!:D

Best wishes

Wolfgang

cabin
 

Hi Wolfgang,
we had our bolster cushion made. They look very nice. We had a local guy make them. He said that fabric is very expensive and it costs us a fortune. I am happy that we used the same fabric though.

We have both tables. One in the cabin the other on top. Do you need the dimensions?

I find these cushions and tables anoying.. no where to store them. No wonder they were not in the boat. Our doral had a place for everything.

We like it though.
Happy boating!
Gil