Re: Question on Smart Tabs versus Bennett Trim Tabs
Quote:
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
The ladder almost touches the cylinder, but not quite. :wink_thumbup:
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
Quote:
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
I'll try to get a photo this afternoon, it was close on the ladder, but they made it. I haven't snapped the clevis pins yet, but if I had it to do over I'd go with the ST model that only require 8" of vertical clearance to avoid the issue altogether. Again, mine are mounted as far outboard as I felt possible, to get the best results from them. I put it on & raised it by hand, they will compress slightly past horizontal, any more & something will give.
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
1 Attachment(s)
let's see if this works
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
1 Attachment(s)
maybe?
|
Re: Question on Smart Tabs versus Bennett Trim Tabs
Quote:
|
All times are GMT. The time now is 03:26 PM. |