|
ss head light inserts
i was wondering where or if i can get stainless steel head light inserts for the front of my boat. now they are white plastic. i saw ss ones but didnt know if i can get them. 1996 talari. thanks
|
Re: ss head light inserts
Hi difran25,
Your current Docking Lights are made by Barnegat and they're probably the QL-3294 model. If that's the case, you can replace them with the Stainless Steel model, QL-3294-SS, they're a direct replacement. Click here to see the QL-3294-SS You an try contacting Barnegat at 866-493-2777 or E-Mail at [email protected] to see if just the outer SS housing is available by itself to save a few bucks (the entire QL-3294-SS set can run about 6 bills). Google QL3294 SS to find some dealers. Here's one - greatlakesskipper.com. I have purchased from them many times and are quite happy with their prices and service. WetWilly |
Re: ss head light inserts
how do i know for sure what ones i have. would anything tell me? its a 1996 talari 215 cuddy
|
Re: ss head light inserts
Quote:
That's a good question.... the answer is yes and no, If they are factory installed, they're Barnegat lights and although I'm not positive on your model, I am confident you have the QL-3294, but to be safe, I called Barnegat. I talked to John and he explained there are two ways to determine the model: 1) Look inside of your anchor locker and examine the light housing for a sticker with the model number. 2) (The easiest way) Measure the housing on the hull. The QL-3294 measures front to rear about 11" and top to bottom about 5 3/4". Let me know if everything checks out and John also said you can purchase just the SS housing to replace your white ones. They retail for $200 per side. WetWilly |
| All times are GMT. The time now is 02:08 PM. |