I need the Snaps for the original Mariah Covers
I just purchased a 1996 Shabah z190 with the original bow cover and interior cover. The covers are in great shape but a total of 10 female snaps are missing, the cover side.
I measured the head of the male snap part and it measures .393" or 11mm with a 14mm OD of the female part of the snap. All the snaps I can find on line are 10mm or 3.8" with a 13mm OD on the female part of the snap. All the measurements taken are with a metric and SAE dial calipers. so I can be .1mm off but no way am I a full mm off. Anyone know the source for the snaps?? Thanks |
Re: I need the Snaps for the original Mariah Covers
Not sure on the exact snaps, I tried finding my previous order from a few years back. I know I ordered from sailrite in bulk. They worked with the existing male snaps.
Sailrite snaps |
Re: I need the Snaps for the original Mariah Covers
Thanks for looking, I'll get right on it.
I'll let you all know how they work out. |
Re: I need the Snaps for the original Mariah Covers
I ordered the snaps from Sailrite. I purchased the stainless steel snaps not the plated brass snaps.
They fit perfectly. Exactly the same. Very pleased. |
Re: I need the Snaps for the original Mariah Covers
I ordered these. They fitted perfectly
https://nl.aliexpress.com/item/32999...yAdapt=glo2nld |
All times are GMT. The time now is 09:35 AM. |