|
Water Pump Replacment- Alpha Gen2 DIY??
All: I am considering doing this myself. The manual talks of two "special tools" oil seal driver Part Number 91-817569, looks like a two sided driver for setting seals at correct depth, and PN 2681657A2 to replace the pump shaft water pump seal.
Outdrive is 1998 Alpha 1 Generation Two. The water pump is the sea water pump with the Stainless housing. Question: Can Special tools be made? Any recommendations on purchase? Pictures of special tools? Tips traps techniques and suggestions ALWAYS welcome! Many Thanks Dave[/FONT] |
Hi Dave,
I don't know if this will be the same for the 98 Alpha but accordind to the 97 alpha manual, it states that: "NOTE: Water Pump Face Seal Tool is not available separately, 26-816575A2 is a kit part number which includes the tool and the face seal." which is the tool I believe you're referring to. I would contact your local Merc parts dealer and inquire if your kit includes this tool (91-817569) as I believe the 97 and 98 gen II's are the same. Good luck, WetWilly P.S. here is a link to Sterndrives.com, they mention the tool that comes in the kit: "The Gen II water pump kit comes with a little slinger seal installation tool. It's really just a small plastic cup. ". |
| All times are GMT. The time now is 06:37 PM. |