Can't Adjust Analog Clock
 

In a 1999 Z222 the analog clock still ticks, but it seems the knob to adjust the time is stripped out, turning it doesn't change the time, and pushing it in a bit or pulling it out a bit doesn't seem to change that. Any suggestions?

Re: Can't Adjust Analog Clock
 

Send it to Faria, they will fix it for a nominal fee. That's what I did with mine. Had the same problem

Sent from my XT1254 using Tapatalk

Re: Can't Adjust Analog Clock
 

Awesome, thanks!

Re: Can't Adjust Analog Clock
 

What was their "nominal fee" Brupa? If you don't mind sharing? My clock's starting to go too... :wink_thumbup:

Re: Can't Adjust Analog Clock
 

According to their website, $75.

On-Line Repair - Entry Page

Re: Can't Adjust Analog Clock
 

I believe when I had it done it was $55. But it was a few years ago.

Sent from my XT1254 using Tapatalk

Re: Can't Adjust Analog Clock
 

So far on my fall/winter punchlist:

Send back clock to Faria for repair
Send back depth finder gauge to lowerance for repair
Replace seat bushings so it isn't so wobbly
Repair/replace hatch linear actuator
Replace lights with LEDs
Replace vinyl on sun deck/back seats

Re: Can't Adjust Analog Clock
 

Sounds like some good projects in line for the off-season!

Just an FYI though, if you've got an issue with your depth gauge, and it's just flashing .5 or something, double-check to make sure the transducer is still epoxied into the hull in the bilge. This seems to be a common issue. If this isn't the problem, I'm afraid I have some bad news. Lowrance discontinued and no longer supports the 3500 series depth gauges. They abandoned the 192kHz technology many many years ago (10+!). And of course, there's no other units that are compatible with that specific transducer, so the whole system needs to be replaced. If you're one of the lucky few who can find used 3500's on eBay, they can sometimes get into the price of the new Faria and Lowrance systems! The new systems are pretty nice, and include things like water temp too! Just a little food for thought. :wink_thumbup:

Re: Can't Adjust Analog Clock
 

It's not that, it just has dim segments unless you push on it a bit. Pretty common seven segment display issue.

Re: Can't Adjust Analog Clock
 

Your list is about the same as mine lol

Sent from my SM-G900V using Tapatalk