[herm5000]

I recently acquired a z302 and have been doing upgrades. while inspecting the engine compartment I noticed some of the bilge blower hoses cracked , broken or maybe missing. I want to make sure I have it right. in my boat the port side has 2 blowers that have hoses that go to the lower bilge under the engine to pull fumes out. That same size has 2 smaller hoses that hang about a foot down. The starboard side just has the 4 vents with no hoses. does that sound correct for the factory setup? thanks

[woodward33]

Sounds about right. Mine is set up very similar with only one minor difference:

Port Side: 2 hoses to blower that go under the engine, 2 SAME SIZED hoses that are not connected to the blower but are STILL ROUTED UNDERNEATH THE ENGINE.

Starboard Side: 4 vent holes have no hoses.