The Mariah Owners Club
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Mercury MerCruiser (http://www.mariahownersclub.com/forum/mercury-mercruiser/)
-   -   winterizing Bravo III (http://www.mariahownersclub.com/forum/mercury-mercruiser/4988-winterizing-bravo-iii.html)

pincourtmariah 10-25-2010 07:49 PM
Re: winterizing Bravo III
 
My boat has the Mercathode protection also. I should mention my outdrive has very little corrosion for its age, not even worried about it, all the zincs are new. I only mentioned the new zinc on the end of the propeller shaft because I never saw one like that before, and it's not part of the replacement kit. But I guess Mercruiser must have added this because the Bravo III does have a lot of complaints of corrosion, especially in salt water.

Hudson River Steve 12-04-2010 09:27 PM
Re: winterizing Bravo III
 
There is a hole on the B3 for the speedo pick up as well as the zinc anode cavity. There is no hole like on the Alpha which i belive was for the water pump cavity...which is not internal to the B3.

Dredd 12-05-2010 02:32 PM
Re: winterizing Bravo III
 
I think the new zinc was added in '00.


All times are GMT. The time now is 03:50 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page