Re: Hey there!
 

Where exactly is this crank? On the front of the motor but ... I'm confused

Sent from my XT907 using Tapatalk

Re: Hey there!
 

Bottom pulley on engine. There is a center bolt , that is the one you need to try and see if you can turn the engine with.
Usually a 1/2" drive ratchet and short extension with the socket will do the trick.:wink_thumbup:

Re: Hey there!
 

i just tried that. i was scared to go to hard, but when i did, nothing. either way. does it matter which way i turn? clockwise vs counter? i heard i could take spark plugs out and spray lubricant in there and let sit for 24 hrs?

Re: Hey there!
 

If you can't turn it , it's locked up.
PB Blaster or WD40 in the sparkplug holes might loosen it up , but the damage is already done to the cylinders , rings , valves , etc.
I'm afraid your looking at a new engine Matt.
You can pick up a long block on Ebay for around the 2 grand you spoke of eariler , but you need to have the exhaust manifolds pressure tested to make sure they are OK.

Re: Hey there!
 

ohh boy. not good news. thanks for all of the info, you have been a great help!

Re: Hey there!
 

Look at it this way Matt...........she run like a dream with that new engine , and be a lot more reliable too.:wink_thumbup: