1999 Jubilee manual needed; wiring questions
 

While the whole manual would be helpful, the specific interest I have is checking the wiring diagram to make sure all gauges are properly connected. The trim gauge does not work, and I have traced to a unconnected spade connector coming from the harness to where it runs. Other gauges are not functioning properly, but the trim gauge sure would be nice to have... ;-)

I'll take some photos and post them for further detail...

Any assistance would be helpful.

Re: 1999 Jubilee manual needed; wiring questions
 

If you look just above your post you will see both of these "STICKYS" that will answer basic site questions but to help out here are the links The Jubilee manual will be of very little help to you. We do have wiring manuals here on our site that are available to contributing members. Click here to view the benefits of being a contributing member to the Mariah Owners club.

Faulty trim gauges are usually the result of a malfunctioning or out of adjustment trim sensor on the outdrive. If you want to learn about how to adjust or replace the units click here.