The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Introductions (http://www.mariahownersclub.com/forum/introductions/)
-   -   New to site (http://www.mariahownersclub.com/forum/introductions/5003-new-site.html)

HogscaldHoller 10-23-2010 01:51 PM

New to site
 
Found this great site researching info for adding a swim platform and trim tabs to my 99 Z302. Have had this great boat for 2 years after looking for10. Surprised to see Swimplatforms.com so prominently featured on the site. Will plan to share detail and results of these and other projects on my boat.

I am looking for details of factory or owner installed trim tabs on larger Mariah's. A picture would be perfect. I am planning to install Bennett ST-16 tabs at the same time as the swim platform to assure a successful layout of brackets on the transom.

Am also looking into an issue of apparent overheating on the tops of the Captains Choice exhaust tubes inside the boat over the back of the engine.

Any info would be helpful.

Oregondunes 10-23-2010 04:14 PM

Re: New to site
 
welcome to the site. I too have a z302 and just got my bennett 16 tabs in the mail yesterday. Havent installed them yet, but plan to in the next week.

Tabman 10-24-2010 12:14 AM

Re: New to site
 
I like this site too!

If either one of you have questions about installing Bennett ST-16s I will be delighted to help! We can make the actuators (rams) an inch shorter if need be to fit under a swim platform. It's easy and I can have the parts sent to you at no cost.

I check this site daily so I will be standing by if you need any help.

Tom McGow
Bennett Marine

MariahMan 10-24-2010 06:24 AM

Re: New to site
 
Quote:

Originally Posted by HogscaldHoller (Post 26531)
Found this great site researching info for adding a swim platform and trim tabs to my 99 Z302. Have had this great boat for 2 years after looking for10. Surprised to see Swimplatforms.com so prominently featured on the site. Will plan to share detail and results of these and other projects on my boat.

We have a SwimPlatforms.com swim platform on our 252 Shabah and it has been a great addition to the boat! We've been very happy with the construction and it's certainly a very sturdy product. We often have a few big guys hanging out on the back of the boat and we haven't had any problems so far. Best part about the swim platform is that it gave us room to mount a BBQ on the back so when we're hanging out up the lake we can grill up whatever your heart desires ;)

Tom, welcome to the club and thank you for the compliment! Glad to have the support of a vendor, especially Bennett Marine :wink_thumbup:

Your trim tabs are extremely popular around here and i've heard nothing but compliments about them. I'm going to work to get you a badge for your profile that says "Bennett Marine" so that our members can more easily recognize you, if you don't mind. We certainly appreciate the knowledge you bring with you and please let me know if there's anything you think we can do to help spread the word about Bennett Marine or make your time better spent around here.

Oregondunes 10-24-2010 06:42 AM

Re: New to site
 
Quote:

Originally Posted by Tabman (Post 26541)
I like this site too!

If either one of you have questions about installing Bennett ST-16s I will be delighted to help! We can make the actuators (rams) an inch shorter if need be to fit under a swim platform. It's easy and I can have the parts sent to you at no cost.

I check this site daily so I will be standing by if you need any help.

Tom McGow
Bennett Marine

thank you

Tabman 10-24-2010 12:42 PM

Re: New to site
 
Quote:

Originally Posted by MariahMan (Post 26545)
We have a SwimPlatforms.com swim platform on our 252 Shabah and it has been a great addition to the boat! We've been very happy with the construction and it's certainly a very sturdy product. We often have a few big guys hanging out on the back of the boat and we haven't had any problems so far. Best part about the swim platform is that it gave us room to mount a BBQ on the back so when we're hanging out up the lake we can grill up whatever your heart desires ;)

Tom, welcome to the club and thank you for the compliment! Glad to have the support of a vendor, especially Bennett Marine :wink_thumbup:

Your trim tabs are extremely popular around here and i've heard nothing but compliments about them. I'm going to work to get you a badge for your profile that says "Bennett Marine" so that our members can more easily recognize you, if you don't mind. We certainly appreciate the knowledge you bring with you and please let me know if there's anything you think we can do to help spread the word about Bennett Marine or make your time better spent around here.


Thanks for the kind words Ryan! A badge would be great, I'm just happy I can be of help!

Tom McGow
Bennett Marine


All times are GMT. The time now is 07:42 PM.