[Kevingj]

Hello Mariah owners!

I just acquired a 1990 1850XL and it is great working condition! Of course there are some things that need attention such as the 9 breakers on the dash along with the ignition breaker. All are currently working but the red buttons are not longer red and are fragile. The ignition button just broke yesterday.

Does anyone know what amperage each breaker is supposed to be? I have uploaded a picture for reference.

Thank you in advance for any assistance you are willing to provide!

[GregT]

Welcome to the group, glad you found a great boat there! If you remove the breaker, find the 5-digit number on it and the last digits are the breaker amp rating - example 34510 = 10 is the amp rating.

If you have a West marine around, take them there and they can assist with replacements also. Please provide an update on how you resolved this problem as I imagine many panels (including mine) are weather beaten and brittle by now.

Also, FYI - joint the three mariah owners facebook groups which are much more active than this site when you have a question.

[Kevingj]

Thank you Greg for the insight! I will use that information when replacing the breakers next week. Hopefully it should be pretty straightforward as long as I replace them one at a time but then again, it is electrical and could get complicated. I’ll let you know how it goes.

I have also requested entry into the Facebook clubs. Thank you for the heads up!