bravo 3 hose?
1 Attachment(s)
Might anyone know what this hose is on the bravi 3 setup? It's on a 2000 Mariah jubilee 24 ,ft deck boat?
|
Re: bravo 3 hose?
Exhaust bellows:wink_thumbup:
|
Re: bravo 3 hose?
Thanks. That is what I assumed. Does it really matter much if they are cracked open? any harm caused by it?
|
Re: bravo 3 hose?
Won't hurt a darn thing.:wink_thumbup:
Play all summer and replace this fall when you do drive service.:yes_grin: |
Re: bravo 3 hose?
Something to consider: if the exhaust bellow is that bad off the others may not be far behind. That's one heck of a way to end a weekend and/or boating season.
Sent from my DROID RAZR HD using Tapatalk |
Re: bravo 3 hose?
I wouldn't get too worried about the exhaust bellows. I know guys who remove them & run without them. Personally i would do what Larry suggested. When you winterize the boat this fall, that's a good time to replace the bellows. And while you have the drive off, check the drive bellows closely for cracks or splitting. At Moto says, that's a far more serious issue. And heck, while you have the drive off, if your trim/tilt gauge isn't working and the sensor needs replacing that's a great time to do that job too cuz the wiring has to be run thru the outdrive/bellows.
|
All times are GMT. The time now is 05:19 PM. |