Closing Windshield
1 Attachment(s)
Anyone have this problem?
Center windshield is too tight when closed, need to hit it to fit in opening. What did you do to make better? I put a jack between the walls, and spread them enought to let window close easy, a little more since it will spring back in a few days, I think. Maybe best to leave it like this all winter next year. |
Re: Closing Windshield
Take the foam strip out, loosen off the screws, move the windshield a bit, tighten the screws & put the foam back in place.
|
Re: Closing Windshield
Which foam strip do you take out. Mine is doing the same thing?
|
Re: Closing Windshield
The foam strip under the glass on the outside of the boat.
|
Re: Closing Windshield
Thanks, I 'll give it a try. New boat to me. I have a few things to fix.
Have you ever had trouble wiht the motorized stern light? |
Re: Closing Windshield
Quote:
|
Re: Closing Windshield
Quote:
|
Re: Closing Windshield
|
Re: Closing Windshield
i tried moving the windshield and it worked like a charm. Only took about 20 minutes. It fits perfectly now. Many thanks,
|
Re: Closing Windshield
Quote:
:wink_thumbup: |
Re: Closing Windshield
I tried as suggested but did not get the same results. Any other method recommended?
|
Re: Closing Windshield
Quote:
Did you loosen the screws on both sides so that the windshield would move on each side? There is a bit of play in there to do this and it should be enough to fix the problem. |
Re: Closing Windshield
When I unsnapped the cover today to re-try your suggestion, low and behold it was closed! Although still a little tight but at least I can close it and put my bow cover on properly.
Thanks for the help. |
Re: Closing Windshield
Quote:
|
Re: Closing Windshield
Quote:
no KIDDING loL Same issues I Think this site is going to be very valuable! |
Re: Closing Windshield
Mine was the same way. without the snap top bimini it closes fine, with the bimini on it pulls it down so it doesnt fit just right,
|
Re: Closing Windshield
Did mine before the big 4th...
Had to take out all the screws from front opening, around to the vent window. It had to go out as well as over. I would suggest a piolt hole before screwing it down, I stripped a couple of screws before I did it. |
Re: Closing Windshield
yes, definitely worth a little drill bit. I still have too much tension though. may have to move other side too.
|
Re: Closing Windshield
Quote:
|
Re: Closing Windshield
Only moved the starboard side on mine, it was enough and not noticable.
|
All times are GMT. The time now is 08:26 AM. |