New badges for the back of seats install ?
 

I am going to be replacing the badges on the seat and wondering what is the easiest way to do it? Also, I will probably replace the badges on the side of the hull as well. Any insight into the easiest way to do this would be greatly appreciated!

Re: New badges for the back of seats install ?
 

It's pretty easy.

1. Peel off old shields. You can use a hair dryer for heat if need be.
2. Remove all of the old adhesive using alcohol, vinyl off, or goo gone.
3. Clean surface using acetone to remove any wax or contaminants
4. Peel off paper backing of new shields.
5. Apply, and press down firmly.

I'd suggest doing this in warm weather as it makes things much easier. Also, make sure you get the Gold shields. :)

Re: New badges for the back of seats install ?
 

Finally something easy to do!

Re: New badges for the back of seats install ?
 

I replaced mine on the hull. It makes a world of difference.