Re: Audio
check on your amp that is powering the tower speakers, there should be a switch with 3 settings, they are LP,MP,HP - you want it on MP this is a filter that you use depending what speakers you are using the LP is low pass that mainly allows bass through and the HP that allows very little bass through. The MP lets a good mixture thru that those speakers should handle, also you can check the bass setting on the radio and adjust there, but the switch needs to be checked first, if it is still too much bass it won't hurt to put the switch on HP.
Not to confuse you anymore, but you may also have the power (a.k.a. gain) on the amp turned up too high. These are good places to start.
|