[waynecochrane]

I have a 2001 18 ft bowrider. The gas cap is made of plastic and the latch is broken. It has a part number on it of 911805. Can't seem to find it anywhere. I'd go for an aftermarket/replacement but they all look to have a straight tube while what the boat has is a angled tube.

Any advice?

[Kurt Z.]

Try www.backtoboating.com
I sent an E-mait to them, expaining I could not find my cap either. They suggested a replacement and it worked just fine.
Back to Boating Boat Parts - Featuring Attwood Gas Springs, Bilge Pumps, Navigation Lights, Boat Seats, Ventilation and Seat Hardware - Back to Boating Boat Parts - Featuring Attwood Gas Springs, Bilge Pumps, Navigation Lights

[Motoxxx43]

Or if you want to get away from the plastic cap here are some ideas:

Gas Fills - Flip Top - Dana Marine Products

CP Performance - Fuel Fills

Some of the fuel fills are right around $30 and they are aluminum or SS.

[ShabahZ280]

Let me check when I get home from work, I may have what you need. I have a few attwood plastic gas caps & parts that were leftovers & prototypes from the factory.