The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   General Maintenance (http://www.mariahownersclub.com/forum/general-maintenance/)
-   -   Garboard Drain Replacement (http://www.mariahownersclub.com/forum/general-maintenance/12137-garboard-drain-replacement.html)

juttmk 08-13-2018 12:58 AM
Garboard Drain Replacement
 
Drain plug frozen and completely stripped. When replacing the garboard drain assembly can the old screw holes be reused by applying some 4200 in each hole before installing or should the new plate be rotated and new screw holes drilled?
Thanks in advance!

mikeyt 08-13-2018 02:13 AM
Re: Garboard Drain Replacement
 
I would probably rotate the plate and drill new holes. I'd also fill all of the holes with 4200.

juttmk 08-13-2018 02:53 AM
Re: Garboard Drain Replacement
 
Thanks! I appreciate the help.

juttmk 08-14-2018 05:53 PM
Re: Garboard Drain Replacement
 
Do you know which version of Garboard would work on my setup?

juttmk 08-17-2018 10:58 PM
Re: Garboard Drain Replacement
 
The new Garboard I just received is for a 1” bore. My boats bore is 1.33”. Is this to much play or will the 3M 4200 seal everything up?

mikeyt 08-18-2018 02:28 PM
Re: Garboard Drain Replacement
 
Quote:
Originally Posted by juttmk (Post 65029)
The new Garboard I just received is for a 1” bore. My boats bore is 1.33”. Is this to much play or will the 3M 4200 seal everything up?
A very generous amount of 4200 or 5200 might seal it up but... i would prefer to see a 1.25" garbord in there.


All times are GMT. The time now is 11:53 AM.