The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Trailering and Tow Vehicles (http://www.mariahownersclub.com/forum/trailering-tow-vehicles/)
-   -   Can't match hub seal? (http://www.mariahownersclub.com/forum/trailering-tow-vehicles/1258-cant-match-hub-seal.html)

boarder1010 06-08-2008 12:51 AM

Can't match hub seal?
 
I have a Chariot trailer with my 1995 Barchetta 182 and went to redo the bearings today but could not find anyone who could match the seal. The bearings are standard but for some reason the seal OD is slightly smaller than that of a standard seal. My seal is 2.328 inches and the standard seal that would come in a kit with the same bearings I have would be over 2.5" OD. The ID of the seal rubber is the same on my seal and on the 2.5" seal. I went to several autoparts stores, camper stores, and the one Boat shop we have and no one even has a book that shows such a size is available.

Has anyone ran into this before? Where is everyone sourcing their bearings and seals?

MariahPD 06-08-2008 04:10 AM

Contact Bobby V at Prestige Trailers, 618-542-8313. Tell him what you have and he will be able to send you a new set of bearings and races out. Bobby can help you out with your Chariot Trailer needs.

boarder1010 06-08-2008 04:21 PM

Found my seals!!
 
I found the name "Unique Functional Products" on the hub with a bunch of numbers so I googled it and got this website.

http://www.ufpnet.com/

this site has all sorts of good information for those who have their surge brake system. There is installation, maintenance and service as well as complete breakdown of parts including bearings and seals. I emailed them to get a couple seals shipped or possibly crossed to something I can get faster.

ShabahZ280 06-09-2008 03:02 PM

I wouldn't discount the contact MariahPD gave you, he's a very valuable asset to our forum as he used to be the Customer Service & Warranty Manager at Mariah. I'd call them up first!

To my understanding Prestige took Chariot's place when they closed. I believe the blueprints and designs could have been sold to them because I can't look at a Prestige trailer (even today) and not see many of Chariot's original designs and features.

Cj7 07-23-2008 11:05 PM

Wheel seal
 
I have the seal you are looking for in stock... I own a hitch shop and trailer parts, here in AZ.. Call if you need any help!!!!! We do alot of trailers here with lake Mead, Mohave and Havasue sooo close. And I will throw in a 10% discount for being a member of the mariah owners club if the site admin don't mind....


R&R Hitches
928-757-3020
ask for Tony or Stephanie

ShabahZ280 07-28-2008 05:30 PM

CJ7, sent you a PM!

Cj7 07-31-2008 05:35 PM

I sent one back at ya!!!!!:wink_thumbup:


All times are GMT. The time now is 08:26 PM.