[clman8585]

Please post pics of finished product

[ipgregory]

Will do.

[clman8585]

Pic before I started adding on the the snaps about every foot apart. Next step is to het it hemmed for a finished product. Obviously there is a few inches of extra sunbrella all the way around which will cut down once its hemmed.

[ipgregory]

Just got the boat back with the new Custom Cockpit Cover. Forest Green Sunbrela to match the hull stripe (close anyway). $775 including all new snaps along the bottom of the windshield as there weren't any before and new snaps for the top edge to replace missing ones for the Convertible Top. All the edges are reinforced as well as reinforcement at the back for all the parts along the windshield frame and over the brackets for the top.

Here's some pics as promised.

[Mariah1]

Nice looking cover

[Lucky14]

Way way way late relply but interior guys in midlothian south side of richmond. Drop your boat with him. My two 2004 sx19s were different in measurments

[tdczar]

clman8585, are you still looking for a boat cover? I bought one several years ago at a local company named East Coast Canvas, West Columbia,SC Ph:803-808-2522. They did have the form for my 2007 SX18, and said that they were a supplier for Mariah covers. They put the snaps on and built a cover for me for about $1100 back in 2010(I think). The fabric is "Sunbrella", and has held up very well, but the stitching is coming loose, so they will restitch everything for about $150.

Good luck,
tdczar

[Lucky14]

^ditto

I had 2 2003 sx19 boats a 4.3 with covers and a 5.0 with out. My upholster used the 4.3 covers as a template for size only not snap position, guess what? The boats beam size where different. He ended up having to cut the new cover in half and add 2 inches.

I measured it and the 5.0 as larger. Moral of a story drop the boat off and be without boating for a week and try not to out smart yourself

Even with all that I paid I think like 700 or so for mine with premium fabric see my other posts