fuel filler assembly for Talari
 

i wonder if anybody can help with this - i have searched Attwood and others with no success for a replacement filler and cap for a Talari 216 1998. The existing is black plastic with four screws and is straight with no breather. would be nice to replace with steel or chrome.

Re: fuel filler assembly for Talari
 

This Indy Style one from Attwood fits my boat. Mine has a 1.5" filler hose.

Re: fuel filler assembly for Talari
 

That's very helpful - i will try this one. Are there screw holes in the filler that match the existing four? i had a look from underneath and it's going to be a devil if a job getting the old one out as it's so difficult to access - i may cut a hole in the grp to get better access - i have to remove the rear bench seat and the engine cover boards and stretch my arm through to the limit and try to undo the jubillee clip that i can feel around the top of the rubber fuel hose in order to release the filler and pull it out from the top. A small but inaccessible job that will not do my back much good!