Do I need this part
I have a 1998 talari 179. Where the built in dash cooler drain comes through the hull there is a small white plastic piece that looks like a washer. On our last trip it must have rubbed against the dock and about half of it is now broken. My question is does this piece keep water off anything or is it just trim to hide the sides of the hole for the drain. Thanks for any help.
|
Re: Do I need this part
its a body grommet. Id say YES it would be a good idea to keep it. It keeps water out of the hull from the outside and completes the drain system from the cooker.
|
Re: Do I need this part
I would examine it closely to see if the damage allows water to access the hull itself. I suspect you can live without replacing the piece but it might be wise to put a touch of silicone on it to prevent any water entry.
|
Re: Do I need this part
My gromment is gone and would like to replace it, so I guess I should of asked where I can get a replacement or if one is not availible is there something I can use in its place. Thanks again you guys are great.
|
Re: Do I need this part
I would think that either West Marine or Great Lake Skipper would have them. Most of the new boats come with polished stainless steel ones now. Probably so they dont break.
|
Re: Do I need this part
Quote:
|
Re: Do I need this part
I dont have your size boat and mine has two different size grommets.
maybe someone else with your model can chime in here with the correct size |
Re: Do I need this part
They are only a few bucks a piece at most marine supply stores.... just buy a couple different sizes, then return the ones that don't fit!
|
All times are GMT. The time now is 02:10 AM. |