| mustang67gt1 |
05-14-2019 08:10 PM |
Re: Z210 Shabah Top Speed
Since my post I have done quite a few things. Over the winter I pulled the motor and did a complete rebuild with Vortex heads and a roller factory style cam. the pistons I went to speedpro Hypereutectic at 9 1/2 compression. The intake is a aluminum intake made by Jegs for vortex heads. I installed a upgrade petronix ignition and coil with 9mm plug wires. The carb is a 650 Edelbrock marine and a carter electric marine fuel pump. I am still breaking the motor in and have not had it all out yet. Cruising at 4000 RPMS I am currently doing 49.6 mph. In a few weeks I will be able to do the full 5000 RPMs and should run close to 60mph. My other motor you talked about did a best of 54mph with 2 people. I have the same prop which pulls hard out of the hole and good top end. Its a SS 14 1/2 x 19 prop works very well.
I added some pics of the new motor and boat hope they go through.
|