HELP! Air/Sea Temp gauge not working on my 96 Z272
 

Hi, I have a near mint 96 Z272 with a 502 MPI / Bravo 1 combo and when I replaced the stereo bezel, I didn't realize I had to drill the holes around the LED display. I accidentially sat it down which caused a small spark and now all I get on the display is 1 whether I set it to sea or air temp. I checked the wiriing several times, so I know that part is correct, but I would like to get it working again. Any ideas on how to test or repair or where I can find a replacement?

Mike

Re: HELP! Air/Sea Temp gauge not working on my 96 Z272
 

You might want to PM member rjobe, he had done some work copying the code for the units and restoring his malfunctioning one.

You may also want to have a good look at this thread: http://www.mariahownersclub.com/foru...emp-gizmo.html and this one: http://www.mariahownersclub.com/foru...n-display.html

Welcome to the club!