The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Original Mariah Talk (http://www.mariahownersclub.com/forum/original-mariah-talk/)
-   -   Where does this go? (http://www.mariahownersclub.com/forum/original-mariah-talk/2083-where-does-go.html)

300sflyer 02-18-2009 11:46 PM

Where does this go?
 
I found this in one of the storage compartments in my 94 Davanti Z235. Anybody know what it is or where it goes?:confused:

http://img.photobucket.com/albums/v6...r/DSCN0116.jpg

Thanks!

indykoch 02-19-2009 02:07 PM

Re: Where does this go?
 
Looks like either a cushion support (acts like a ledge to mount a filler cushion) or maybe a guide that goes on the bottom of a cushion and aligns it to the proper position.

What storage compartment was it in?

aquaknot 02-19-2009 05:19 PM

Re: Where does this go?
 
agreed, I have similar nylon support pieces throughout my boat, but not sure of the exact location of that piece. I have a small bag of Mariah droppings from unknown locations. When I open my boat in the spring I'll have a look.

300sflyer 02-19-2009 06:07 PM

Re: Where does this go?
 
I found where it goes.... Right under the rear edge of the drivers captains seat, to help hold the webbed pocket on the back of the seat.

Thanks for the help.:wink_thumbup:

aquaknot 02-19-2009 06:18 PM

Re: Where does this go?
 
would you happen to know where to purchase that type of nylon/plastic. I'd like use it to re enforce under the bow cushions.

300sflyer 02-20-2009 12:06 AM

Re: Where does this go?
 
Not sure where you find that...

Perhaps some 1x2 hardwood glued and screwed on it's edge to the bottom of the plywood would be stiffer and stronger?

WetWilly 02-21-2009 01:53 PM

Re: Where does this go?
 
Quote:

Originally Posted by aquaknot (Post 12233)
would you happen to know where to purchase that type of nylon/plastic. I'd like use it to re enforce under the bow cushions.

Aquaknot, take a look at this thread (click here), post #6 has a link for a Plastic material that I found from West Marine that may help you.

WetWilly

z275st 02-21-2009 04:47 PM

Re: Where does this go?
 
aquaknot,

You could buy one of these ski hatch doors and cut to the sizes you need.

http://cgi.ebay.com/ebaymotors/MARIA...cessories_Gear

aquaknot 02-23-2009 12:31 PM

Re: Where does this go?
 
thanks for the help. I'll make a visit to west marine

Z 202 02-23-2009 05:05 PM

Re: Where does this go?
 
You might also want to check out Warehoused Plastic Sales Inc.

http://www.theplasticstore.com/

They supply the machine shop where I work.


All times are GMT. The time now is 08:05 PM.